CCNA Routing & Switching

Enquire Now

 

The CCNA v3 certification training includes both Interconnecting Cisco Networking Devices, Part 1 (ICND1) and Interconnecting Cisco Networking Devices, Part 2 (ICND2) courses merged into one. Students will learn how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, connecting to a WAN, and identifying basic security threats. It also includes more in-depth topics that teach learners how to perform basic troubleshooting steps in enterprise branch office networks, preparing students for the Cisco CCNA certification.

Key Features of CCNA Training:
Guaranteed Training on Real Time Devices.
CCNA Concepts explained in practical and theoretical context.
24*7 Lab Access.
60+ hours of classroom-style training using an interactive whiteboard and projector session.
Course Revision – By enrolling once you can avail classes for same training up to 2 times.
Smart classrooms fully equipped with projectors, Wi-Fi connectivity, Digital Pads.
Support and Guidance if you are applying for Cisco Global Certification.
Late night and early morning batch facility
24*7 Trainers Availability
Training delivered by Experienced and Certified Trainers.
Mr. Prasad : CCIE R & S – #54318 Mumbai
Mr. Maqsood : CCIE Collaboration – #XXXXX Delhi
Mr. Farhan : CCIE Collaboration, Data Center – #XXXXX Banglore
Mr. Vikas : CCIE Collaboration – #XXXXX Pune

Devices to be used during the Training Program:

Router : 2611 XM, 1841, 1905, 2811
Switches: 2950, 2960, 3750, 3560

Course Prerequisites

Before taking the CCNAX course, learners should be familiar with:
Basic computer literacy
Basic PC operating system navigation skills
Basic Internet usage skills
Basic IP address knowledge
Good understanding of network fundamentals

Topics:

1.0 Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network

  • 1.3.a Firewalls
  • 1.3.b Access points
  • 1.3.c Wireless controllers

1.4 Describe the effects of cloud resources on enterprise network architecture

  • 1.4.a Traffic path to internal and external cloud services
  • 1.4.b Virtual services
  • 1.4.c Basic virtual network infrastructure

1.5 Compare and contrast collapsed core and three-tier architectures

1.6 Compare and contrast network topologies

  • 1.6.a Star
  • 1.6.b Mesh
  • 1.6.c Hybrid

1.7 Select the appropriate cabling type based on implementation requirements

1.8 Apply troubleshooting methodologies to resolve problems

  • 1.8.a Perform and document fault isolation
  • 1.8.b Resolve or escalate
  • 1.8.c Verify and monitor resolution

1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.10 Compare and contrast IPv4 address types

  • 1.10.a Unicast
  • 1.10.b Broadcast
  • 1.10.c Multicast

1.11 Describe the need for private IPv4 addressing

1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.13 Configure, verify, and troubleshoot IPv6 addressing

1.14 Configure and verify IPv6 Stateless Address Auto Configuration

1.15 Compare and contrast IPv6 address types

  • 1.15.a Global unicast
  • 1.15.b Unique local
  • 1.15.c Link local
  • 1.15.d Multicast
  • 1.15.e Modified EUI 64
  • 1.15.f Autoconfiguration
  • 1.15.g Anycast

2.0 LAN Switching Technologies

2.1 Describe and verify switching concepts

  • 2.1.a MAC learning and aging
  • 2.1.b Frame switching
  • 2.1.c Frame flooding
  • 2.1.d MAC address table

2.2 Interpret Ethernet frame format

2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)

2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches

  • 2.4.a Access ports (data and voice)
  • 2.4.b Default VLAN

2.5 Configure, verify, and troubleshoot interswitch connectivity

  • 2.5.a Trunk ports
  • 2.5.b Add and remove VLANs on a trunk
  • 2.5.c DTP, VTP (v1&v2), and 802.1Q
  • 2.5.d Native VLAN

2.6 Configure, verify, and troubleshoot STP protocols

  • 2.6.a STP mode (PVST+ and RPVST+)
  • 2.6.b STP root bridge selection

2.7 Configure, verify and troubleshoot STP related optional features

  • 2.7.a PortFast
  • 2.7.b BPDU guard

2.8 Configure and verify Layer 2 protocols

  • 2.8.a Cisco Discovery Protocol
  • 2.8.b LLDP

2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel

  • 2.9.a Static
  • 2.9.b PAGP
  • 2.9.c LACP

2.10 Describe the benefits of switch stacking and chassis aggregation

3.0 Routing Technologies

3.1 Describe the routing concepts

  • 3.1.a Packet handling along the path through a network
  • 3.1.b Forwarding decision based on route lookup
  • 3.1.c Frame rewrite

3.2 Interpret the components of a routing table

  • 3.2.a Prefix
  • 3.2.b Network mask
  • 3.2.c Next hop
  • 3.2.d Routing protocol code
  • 3.2.e Administrative distance
  • 3.2.f Metric
  • 3.2.g Gateway of last resort

3.3 Describe how a routing table is populated by different routing information sources

  • 3.3.a Admin distance

3.4 Configure, verify, and troubleshoot inter-VLAN routing

  • 3.4.a Router on a stick
  • 3.4.b SVI

3.5 Compare and contrast static routing and dynamic routing

3.6 Compare and contrast distance vector and link state routing protocols

3.7 Compare and contrast interior and exterior routing protocols

3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing

  • 3.8.a Default route
  • 3.8.b Network route
  • 3.8.c Host route
  • 3.8.d Floating static

3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

3.11 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.12 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.13 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues

4.0 WAN Technologies

4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication

4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication

4.3 Configure, verify, and troubleshoot GRE tunnel connectivity

4.4 Describe WAN topology options

  • 4.4.a Point-to-point
  • 4.4.b Hub and spoke
  • 4.4.c Full mesh
  • 4.4.d Single vs dual-homed

4.5 Describe WAN access connectivity options

  • 4.5.a MPLS
  • 4.5.b Metro Ethernet
  • 4.5.c Broadband PPPoE
  • 4.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)

4.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

4.7 Describe basic QoS concepts

  • 4.7.a Marking
  • 4.7.b Device trust
  • 4.7.c Prioritization
    • 4.7.c. [i] Voice
    • 4.7.c. [ii] Video
    • 4.7.c. [iii] Data
  • 4.7.d Shaping
  • 4.7.e Policing
  • 4.7.f Congestion management

5.0 Infrastructure Services

5.1 Describe DNS lookup operation

5.2 Troubleshoot client connectivity issues involving DNS

5.3 Configure and verify DHCP on a router (excluding static reservations)

  • 5.3.a Server
  • 5.3.b Relay
  • 5.3.c Client
  • 5.3.d TFTP, DNS, and gateway options

5.4 Troubleshoot client- and router-based DHCP connectivity issues

5.5 Configure, verify, and troubleshoot basic HSRP

  • 5.5.a Priority
  • 5.5.b Preemption
  • 5.5.c Version

5.6 Configure, verify, and troubleshoot inside source NAT

  • 5.6.a Static
  • 5.6.b Pool
  • 5.6.c PAT

5.7 Configure and verify NTP operating in a client/server mode

6.0 Infrastructure Security

6.1 Configure, verify, and troubleshoot port security

  • 6.1.a Static
  • 6.1.b Dynamic
  • 6.1.c Sticky
  • 6.1.d Max MAC addresses
  • 6.1.e Violation actions
  • 6.1.f Err-disable recovery

6.2 Describe common access layer threat mitigation techniques

  • 6.2.a 802.1x
  • 6.2.b DHCP snooping
  • 6.2.c Nondefault native VLAN

6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering

  • 6.3.a Standard
  • 6.3.b Extended
  • 6.3.c Named

6.4 Verify ACLs using the APIC-EM Path Trace ACL analysis tool

6.5 Configure, verify, and troubleshoot basic device hardening

  • 6.5.a Local authentication
  • 6.5.b Secure password
  • 6.5.c Access to device
    • 6.5.c. [i] Source address
    • 6.5.c. [ii] Telnet/SSH
  • 6.5.d Login banner

6.6 Describe device security using AAA with TACACS+ and RADIUS

7.0 Infrastructure Management

7.1 Configure and verify device-monitoring protocols

  • 7.1.a SNMPv2
  • 7.1.b SNMPv3
  • 7.1.c Syslog

7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA

7.3 Configure and verify device management

  • 7.3.a Backup and restore device configuration
  • 7.3.b Using Cisco Discovery Protocol or LLDP for device discovery
  • 7.3.c Licensing
  • 7.3.d Logging
  • 7.3.e Timezone
  • 7.3.f Loopback

7.4 Configure and verify initial device configuration

7.5 Perform device maintenance

  • 7.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
  • 7.5.b Password recovery and configuration register
  • 7.5.c File system management

7.6 Use Cisco IOS tools to troubleshoot and resolve problems

  • 7.6.a Ping and traceroute with extended option
  • 7.6.b Terminal monitor
  • 7.6.c Log events
  • 7.6.d Local SPAN

7.7 Describe network programmability in enterprise network architecture

  • 7.7.a Function of a controller
  • 7.7.b Separation of control plane and data plane
  • 7.7.c Northbound and southbound APIs

Exam Details

Exam Name: Exam Code : Duration: Registration:
CCNA Routing and Switching CCNAX 200-125 90 Minutes (60 - 70 questions) Pearson VUE

Upon completing this course, you will have the skills and knowledge to:

  • 1. Install, operate, and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security

  • 2. Describe the effects of new technologies such as IoE, IoT, IWAN, and SDN on network evolution.

  • 3. Get a basic understanding of IPv4 / IPv6 networks.

  • 4. Work confidently on WANs, LAN switches and IP routers.

  • 6. You will get a firm grasp on the key fundamentals of Networking and TCP/IP after completion of this course.

  • 7. Operate a medium-sized LAN with multiple switches supporting VLANs, trunking, switch stacking, chassis aggregation and spanning tree protocols

  • 8. Troubleshoot IP connectivity

  • 9. Configure and troubleshoot EIGRP and OSPF in IPv4 and IPv6 environments

  • 10.Define characteristics, functions and components of a WAN

  • 11. Describe SNMP, Syslog, and manage Cisco device configurations, IOS images and licenses

  • 12. Understand QoS, virtualization and cloud services, and network programmability related to WAN, access and core segments.

Job Oppurnities

Network Engineers
Networking Administrators
Networking Specialists
Network Support Specialists
Network Consultants
System Integrators
System Engineers

Training Plan

Upcoming Batches
Weekday Batch : Weekend Batch:
On Request On Request
Training Plan
Weekday Batch: Duration Timing: Mode:
Mon - Fri 4 weeks 4 Hours / Day Online/Onsite
Sat - Sun 2 months 6 Hours / Day Online/Onsite

Group Discount
In a Group of 2 discount will be 10% per head
In a Group of 3 discount will be 15% per head
In a Group of 4 discount will be 20% per head

Post a Review

Reviews

Name
Email
Review Title
Rating
Review Content

Get In Touch