CCIE Wireless

Enquire Now


The Cisco Certified Internetwork Expert Wireless (CCIE Wireless) certification assesses and validates wireless expertise. Candidates who pass the CCIE Wireless certification exams demonstrate broad theoretical knowledge of wireless networking and a solid understanding of wireless local area networking (WLAN) technologies from Cisco, the market leader in WLAN technology.

CCIE certified and experienced Cisco instructors will facilitate the classes. The instructor will provide detailed explanation and facilitate group discussion. Students will also receive individual attention from the instructor if needed. Throughout the course students will have access to the most up to date rack of equipment matching the CCIE Wireless Lab blueprint. The course is frequently reviewed to ensure that it is up to date and meets the latest topics tested on the CCIE Wireless V3.1 Lab exam blueprint.

CCIE Wireless Lab is divided in 2 different section:
1 Configuration
2 Diagnostics

Key Features of CCIE Training:
Guaranteed Training on Real Time Devices.
CCIE Concepts explained in practical and theoretical context.
24*7 Lab Access.
60+ hours of classroom-style training using an interactive whiteboard and projector session.
Course Revision – By enrolling once you can avail classes for same training up to 2 times.
Smart classrooms fully equipped with projectors, Wi-Fi connectivity, Digital Pads.
Support and Guidance if you are applying for Cisco Global Certification.
Late night and early morning batch facility
24*7 Trainers Availability
Training delivered by Experienced and Certified Trainers.
Mr. Naiman : CCIE Security – #54008 Mumbai

Devices to be used during the Training Program:
Cisco Wireless Access Points:
Cisco Aironet 3700 Series Access Point (Controller-based and Autonomous)
Cisco Aironet 1850 Series Access Point (Mobility Express)
Cisco Aironet 1600 Series Access Point

Cisco Wireless Controllers:
Cisco 5500 Series Wireless Controller
Cisco Virtual Wireless Controller

Cisco Catalyst Switches:
Cisco Catalyst 4500-E Series Switches (Sup 8-E)
Cisco Catalyst 3650 Series Switches
Cisco Connected Mobile Experiences (running on Mobility Services Engine Virtual Appliance)

Cisco Identity Services Engine
Cisco Prime Infrastructure

Cisco Aironet Access Points Cisco IOS Release 15.3
Cisco Unified Wireless Network Software Release 8.3
Cisco Catalyst 4500-E Series Switches Cisco IOS Software, IOS-XE Software Release 3.6
Cisco Catalyst 3650 Series Switches Cisco IOS Software, IOS-XE Software Release 3.6
Cisco Connected Mobile Experiences 10.3
Cisco Identity Services Engine 2.2
Cisco Prime Infrastructure 3.2

Other (no candidate configuration required)
Cisco AnyConnect Secure Mobility Client
Cisco Jabber
Cisco Spectrum Expert

Course Prerequisites

Before starting this course one should have knowledge of CCNA, CCNP and CCIE R&S (written), and dedication to learn Labs for the same.



1.0 Plan and Design WLAN Technologies

1.1 Describe WLAN organizations and regulations

1.2 Describe IEEE 802.11 standards and protocols

1.3 Plan & design wireless solutions requirements

  • 1.3.a Translate customer requirements into services and design recommendations
  • 1.3.b Identify ambiguity and/or information gaps
  • 1.3.c Evaluate interoperability of proposed technologies against deployed IP network infrastructure & technologies
  • 1.3.d Select an appropriate deployment model
  • 1.3.e Regulatory domains and country codes

1.4 RF planning, designing and validation

  • 1.4.a RF Design / Site survey
    • 1.4.a [i] Define the tasks/goals for a preliminary site survey
    • 1.4.a [ii] Conduct the site survey
    • 1.4.a [iii] Determine AP quantity, placement and antenna type
  • 1.4.b Architect indoor and outdoor RF deployments
    • 1.4.b [i] Coverage
    • 1.4.b [ii] Throughput
    • 1.4.b [iii]Voice
    • 1.4.b [iv]Location
    • 1.4.b [v] High Density / Very High Density
  • 1.4.c Construct an RF operational model that includes:
    • 1.4.c [i] Radio resource management (Auto-RF, manual, hybrid, Flexible Radio Assignment, TPC and DCA)
    • 1.4.c [ii] Channel use (radar, non-WiFi interference, Dynamic Bandwidth Selection)
    • 1.4.c [iii] Power level, overlap
    • 1.4.c [iv] RF profiles
  • 1.4.d Validate implemented RF deployment

2.0 Configure and Troubleshoot the Network Infrastructure

2.1 Configure and troubleshoot wired infrastructure to support WLANs

  • 2.1.a VLANs
  • 2.1.b VTP
  • 2.1.c STP
  • 2.1.d Etherchannel

2.2 Plan network infrastructure capacity

2.3 Configure and troubleshoot network connectivity for:

  • 2.3.a WLAN clients
  • 2.3.b WLCs (appliance, virtual, and Mobility Express)
  • 2.3.c Lightweight APs
  • 2.3.d Autonomous APs

2.4 Configure and troubleshoot PoE for APs

2.5 Configure and troubleshoot QoS on the switching infrastructure

  • 2.5.a MQC
  • 2.5.b MLS QoS

2.6 Configure and troubleshoot multicast on the switching infrastructure

  • 2.6.a PIM
  • 2.6.b Basic IGMP (including IGMP snooping)
  • 2.6.c MLD

2.7 Configure and troubleshoot IPv4 connectivity

  • 2.7.a Subnetting
  • 2.7.b Static and inter-VLAN routing

2.8 Configure and troubleshoot basic IPv6 connectivity

  • 2.8.a Subnetting
  • 2.8.b Static and inter-VLAN routing

2.9 Configure and troubleshoot wired security for APs

  • 2.9.a MAB
  • 2.9.b dot1X for APs

2.10 Configure and troubleshoot the following to support wireless services

  • 2.10.a DNS
  • 2.10.b DHCPv4 / DHCPv6
  • 2.10.c NTP, SNTP
  • 2.10.d SYSLOG
  • 2.10.e SNMP
  • 2.10.f CDP, LLDP
  • 2.10.g mDNS (including SDG)

3.0 Configure and Troubleshoot an Autonomous

3.1 Configure and troubleshoot different modes and roles

  • 3.1.a WGB
  • 3.1.b Point to point & Point to multi-point bridge

3.2 Configure and troubleshoot SSID/MBSSID

3.3 Configure and troubleshoot security

  • 3.3.a L2 security policies
  • 3.3.b Association filters
  • 3.3.c Local radius
  • 3.3.d dot1X profiles

3.4 Configure and troubleshoot radio settings

3.5 Configure and troubleshoot multicast

3.6 Configure and troubleshoot QoS

4.0 Configure and Troubleshoot AireOS appliance, virtual, and Mobility Express controllers

4.1 Configure and troubleshoot secure management access and control plane

  • 4.1.a AAA
  • 4.1.b CPU ACLs
  • 4.1.c Management via wireless interface
  • 4.1.d Management via dynamic interface

4.2 Configure and troubleshoot interfaces

4.3 Configure and troubleshoot lightweight APs

  • 4.3.a dot1x
  • 4.3.b AP modes
  • 4.3.c AP authentication / AP authorization
  • 4.3.d Logging
  • 4.3.e Local AP CLI configuration
  • 4.3.f WLC based AP configuration

4.4 Configure and troubleshoot high availability and redundancy

  • 4.4.a SSO
  • 4.4.b N+1, N+N

4.5 Configure and troubleshoot wireless segmentation

  • 4.5.a RF profiles
  • 4.5.b AP groups
  • 4.5.c FlexConnect

4.6 Configure and troubleshoot wireless security policies

  • 4.6.a WLANs
  • 4.6.b L2/L3 security
  • 4.6.c Rogue policies
  • 4.6.d Local EAP
  • 4.6.e Local profiling
  • 4.6.f ACLs
  • 4.6.g Certificates

4.7 Configure and troubleshoot FlexConnect and Office Extend

4.8 Configure and troubleshoot Mesh

4.9 Implement RF management

  • 4.9.a Static RF management
  • 4.9.b Automatic RF management
  • 4.9.c CleanAir
  • 4.9.d Data rates
  • 4.9.e RX-SOP
  • 4.9.f Air Time Fairness (ATF)
  • 4.9.g Flexible Radio Assignment (FRA)

4.10 Configure and troubleshoot mobility

  • 4.10.a L2/L3 roaming
  • 4.10.b Multicast optimization
  • 4.10.c Mobility group scaling
  • 4.10.d Inter-release controller mobility
  • 4.10.e Mobility anchoring

4.11 Configure and troubleshoot multicast

4.12 Configure and troubleshoot client roaming optimization

  • 4.12.a CCKM
  • 4.12.b Optimized Roaming
  • 4.12.c Band Select
  • 4.12.d Load Balancing
  • 4.12.e 802.11r/k/v

5.0 Configure and Troubleshoot Wireless Security & Identity Management with ISE

5.1 Configure and troubleshoot identity management

  • 5.1.a Basic PKI for dot1x and WebAuth
  • 5.1.b External identity sources (AD)

5.2 Configure and troubleshoot AAA policies

  • 5.2.a Client authentication and authorization
  • 5.2.b Management authentication and authorization
  • 5.2.c Client profiling and provisioning
  • 5.2.d RADIUS attributes
  • 5.2.e CoA

5.3 Configure and troubleshoot wireless guest management

  • 5.3.a Local web authentication
  • 5.3.b Central web authentication
  • 5.3.c Basic sponsor policy

6.0 Configure and Troubleshoot Prime Infrastructure and MSE/CMX

6.1 Configure and troubleshoot management access

  • 6.1.a AAA
  • 6.1.b Virtual domain

6.2 Perform basic operations

  • 6.2.a Create and deploy templates
  • 6.2.b Operate maps
  • 6.2.c Import infrastructure devices
  • 6.2.d High availability
  • 6.2.e Audits
  • 6.2.f Client troubleshooting
  • 6.2.g Notification receivers
  • 6.2.h Reports
  • 6.2.i Monitoring policies

6.3 Configure and troubleshoot Prime Infrastructure jobs

6.4 Operate Security management

  • 6.4.a Configure rogue management
  • 6.4.b Manage alarms and events

6.5 Implement and troubleshoot MSE/CMX

  • 6.5.a Management access
  • 6.5.b Network services
    • 6.5.b [i] Location
    • 6.5.b [ii] Analytics
    • 6.5.b [iii] Connect and Engage
    • 6.5.b [iv] CleanAir
    • 6.5.b [v] wIPS
  • 6.5.c NMSP

6.6 Integrate ISE with Prime Infrastructure and MSE/CMX

7.0 Configure and Troubleshoot WLAN media and application services

7.1 Configure and troubleshoot voice over wireless

  • 7.1.a QoS profiles
  • 7.1.b EDCA
  • 7.1.c WMM
  • 7.1.d BDRL
  • 7.1.e Admission control
  • 7.1.f MQC/MLS

7.2 Configure and troubleshoot video and media

  • 7.2.a Media Stream
  • 7.2.b Admission control

7.3 Configure and troubleshoot mDNS

  • 7.3.a mDNS proxy
  • 7.3.b Service discovery
  • 7.3.c Service filtering

7.4 Configure and troubleshoot AVC and netflow

7.5 Configure and troubleshoot FastLane and Adaptive Fast Transition (802.11r)

8.0 Evolving Technologies v1.1

8.1 Cloud

  • 8.1.a Compare and contrast public, private, hybrid, and multicloud design considerations
    • 8.1.a [i] Infrastructure, platform, and software as a service (XaaS)
    • 8.1.a [ii] Performance, scalability, and high availability
    • 8.1.a [iii] Security implications, compliance, and policy
    • 8.1.a [iv] Workload migration
  • 8.1.b Describe cloud infrastructure and operations
    • 8.1.b [i] Compute virtualization (containers and virtual machines)
    • 6.1.b [ii] Connectivity (virtual switches, SD-WAN and SD-Access)
    • 6.1.b [iii] Virtualization functions (NFVi, VNF, and L4/L6)
    • 6.1.b [iv] Automation and orchestration tools (CloudCenter, DNA-center, and Kubernetes)

8.2 Network programmability (SDN)

  • 8.2.a Describe architectural and operational considerations for a programmable network
    • 8.2.a [i] Data models and structures (YANG, JSON and XML)
    • 8.2.a [i] Device programmability (gRPC, NETCONF and RESTCONF)
    • 8.2.a [ii] Controller based network design (policy driven configuration and northbound/ southbound APIs)
    • 8.2.a [iii] Configuration management tools (agent and agentless) and version control systems (Git and SVN)

8.3 Internet of things (IoT)

  • 8.3.a Describe architectural framework and deployment considerations for IoT
    • 8.3.a [i] IoT technology stack (IoT Network Hierarchy, data acquisition and flow)
    • 8.3.a [ii] IoT standards and protocols (characteristics within IT and OT environment)
    • 8.3.a [iii] IoT security (network segmentation, device profiling, and secure remote)

Exam Details

Exam Name: Exam Code : Duration: Registration:
CCIE Wireless Written 400-351 120 minutes (90-110 questions) Pearson VUE

Lab Exam Details

The lab exam is an eight-hour, hands-on exam which requires you to configure and troubleshoot a series of complex networks to given specifications. Knowledge of troubleshooting is an important skill and candidates are expected to diagnose and solve issues as part of the CCIE Collaboration lab exam.

Lab Exam can be booked once CCIE Written exam is cleared

Job Oppurnities

Network Engineers
Networking Administrators
Networking Specialists
Network Support Specialists
Network Consultants
System Integrators
System Engineers

Training Plan

Training Plan
Weekday Batch: Duration Timing: Mode:
Mon - Fri 4 weeks 4 Hours / Day Online/Onsite
Sat - Sun 2 months 6 Hours / Day Online/Onsite

Group Discount
In a Group of 2 discount will be 10% per head
In a Group of 3 discount will be 15% per head
In a Group of 4 discount will be 20% per head


Upcoming Batches
Weekday Batch : Weekend Batch:
On Request On Request

Post a Review


Review Title
Review Content

Get In Touch